Ivation Window AC Mounting Bracket, No-Ladder Indoor Setup, 19-in, 200 lbs | Locking pin-and-clip beams adjust 25-38in wide, wall depths 4-11in; steel frame fits single/double hung windows only

The Ivation Window AC Mounting Bracket (IVAACM19) turns any single or double hung window into a secure, load-bearing spot for your air conditioner - and you never have to leave your living room to install it. Adjust, position, and lock the bracket into place entirely from indoors, with no ladder, no drilling, and no separate tools needed. Once positioned, a locking pin and clip system holds the steel extension beams exactly where you set them - a more secure, rattle-free hold than traditional spring-button designs. Beams expand from 25 to 38 inches wide and the bracket adjusts to exterior wall thicknesses from 4 to 11 inches, fitting most single and double hung windows. Built from epoxy-coated steel and rated to hold up to 200 lbs, the bracket uses two adjustable support legs and two extension beams to spread your AC unit's weight evenly across the window opening. Integrated foot pads protect your sill and exterior wall from contact marks, anti-slip tape keeps the unit from shifting once placed, and a slight downward pitch drains condensation and rainwater outside instead of back into your home. This 19-inch platform is sized for larger window AC units; the same bracket is also available as the IVAACM15 with a 15-inch platform for standard units. Every fastener and an illustrated assembly guide are included in the box. Note: this bracket is built for single and double hung windows only and is not compatible with slider, crank-out, or casement windows.

• INSTALL ENTIRELY FROM INSIDE YOUR HOME - No ladders, no drilling, and no leaning out the window - adjust, position, and secure this window AC mount from indoors in minutes, with all fasteners and hardware included in the box
• RATTLE-FREE LOCKING PIN AND CLIP SYSTEM - Locks the extension beams into precise position for a hold that outperforms traditional spring-button AC brackets - once set, beams stay firmly in place so your air conditioner stays supported season after season
• BUILT TO HOLD UP TO 200 LBS - Epoxy-coated steel beams expand from 25 to 38 inches wide and fit exterior wall thicknesses from 4 to 11 inches - designed for single and double hung windows only, not compatible with slider, crank-out, or casement windows
• PROTECTS YOUR WINDOW AND WALL - Anti-slip tape on the central bracket keeps your AC unit from shifting, integrated foot pads guard your sill and exterior wall from contact marks, and a slight downward pitch drains condensation outside instead of into your home
• 19-INCH PLATFORM FOR LARGER AC UNITS - Also available as the IVAACM15 with a 15-inch platform for standard units - both sizes adjust the same 25 to 38 inches wide, hold up to 200 lbs, and include an illustrated step-by-step assembly guide